Custom filters Multi Circuit Filters

Type in a keyword or part number and press Search

Custom & Multi Circuit Filters

NEW: FILTER CONNECTOR ASSEMBLIES - RF16800 SERIES
MEDICAL FILTERS
TEMPEST FILTERS
POWER LINE FILTERS
LOW-LEAKAGE FILTERS
Telephone Line Filters
COMMUNICATION/DATA LINE FILTERS
TUBULAR AND SUBMINIATURE FILTERS
UL LISTED FILTERS
MULTI-AGENCY LISTED FILTERS
FACILITY FILTERS
CUSTOM DESIGN FILTERS
MULTICIRCUIT FILTERS
TUBULAR AND SUBMINIATURE FILTERS
MILITARY AND COMMERCIAL FILTERS
HIGH CURRENT/VOLTAGE EMP FILTERS
SECURE/SHIELDED INSTALLATIONS FILTERS
POWER FACTOR CORRECTION COIL ASSEMBLIES
FILTERED CIRCUIT BREAKER PANELS

MULTI CIRCUIT AIRBORNE FILTERS

Single and multi-circuit filters for high shock and vibration applications. Custom and/or QPL filters available to help meet MIL-STD-461. RFI’s testing techniques provide simulation of raw noise disturbance in narrow and wide frequency bands under full load condition. Parasitic currents in differential mode and ground currents in common mode also generate electronic noise disturbances. Custom designs provide maximum insertion loss over a wide frequency range and compliance to any available commercial or military electromagnetic interference specification.

RANGE:
Voltage
115 - 440 Vac

Current
1 - 50 Amps

Application
Multi Circuit Filter and Impedance
Matching network D
subminiature connector interface

Voltage
500 Vdc

Current
200 mA

Insertion Loss
20 db @ 10 MHz
40 db @ 20 MHz
40 db @ 100 MHz
40 db @ 1 GHz

Dimensions
.875”H x 2.06”W x 5.62”D

Application
Airborne Multi Circuit
Power Filter, High density
lo-weight packaging, 3 phase power and dc circuits

Voltage
115 Vac

Current
5 Amps

Frequency
400 Hz

Insertion Loss
60 db @ .15 MHz
80 db @ 1.0 MHz
80 db @ 400 MHz

Dimensions
1.201”H x 4”W x 4.725”D

FILTER CONNECTOR ASSEMBLIES - RF16800 SERIES

RFI INTRODUCES NEW “CUSTOM FILTERED CONNECTORS”. THIS DESIGN INTEGRATES MIL-STD CONNECTORS WITH “QPL” SUBMINIATURE FILTERS. THE INTEGRATED FILTER CONNECTOR OFFERS SIGNIFICANT WEIGHT AND COST SAVINGS AND ALLOWS FOR SIMPLIFIED CUSTOMIZATION, SERVICEABILITY AND EASE OF INSTALLATION .

RFI CORPORATION CAN DESIGN A CUSTOM “FILTERED CONNECTOR” FOR SPECIAL APPLICATIONS, WHICH INCLUDES POWER LINE FILTERS, SIGNAL FILTERS, DATA FILTERS AND COMMUNICATION FILTERS ASSEMBLED INTO THE BASE OF MIL-STD CONNECTORS.

IN MOST APPLICATIONS, THE FILTER CONNECTOR ASSEMBLY WILL FIT THE SAME FOOTPRINT AS THE STANDARD CONNECTOR, WITH A SLIGHT INCREASE OF THE DEPTH.

PLEASE CONTACT RFI ENGINEERING FOR SPECIFIC APPLICATIONS AND
PRODUCT DESIGN SOLUTIONS

Subminiature QPL filter capabilities

Type:
C, L, Pi, T, LL

DC voltage range:
28 - 200 VDC

AC voltage range:
115 - 220 VAC, 50 - 400 Hz

Current range:
1 mA - 10 A

Insertion loss range:
10 KHz to 10 GHz

Available QPL filters:
M15733/ 23,24,25,26,27,34,38,39,48,49,56,58,59

Refer to RFI Filter catalog for standard filters

Click Here for a Printable PDF

MARKETS SERVED